Hareketli Kablo Kanalında Dikey Kullanım Nasıl Yapılır?

In Hanging (U) or Standing Position

As a rule, the vertical use of cable carriers can be implemented with relatively short travel lengths. In vertical use, the movable cable carrier should be used in a hanging position, if possible.

The overall load on the cable carriers during use in a hanging position is significantly lower. Reducing the load on the cable carrier is a requirement for a healthier movement.

In the vertical use of cable carriers, it is important to determine the margin in the length. You should avoid over-tension of the energy chain or, on the contrary, using too much flexibility. Otherwise, the energy chain may bend outward.

The length of the support must be defined based on the total weight, cable density, travel length, and cable carrier selected. You can contact us for detailed information on length determination.

Energy chains must be installed to the fixed point, and the driver in such a way as to allow for the weights of the cables passing through them and the resulting dynamic effect. For vertical use, we recommend the use of metal end connectors for strong fixation of the cable carriers.

For short runs, MMG cable carriers can be installed without special side supports for vertical movement. metal ayak bağlantı kullanımını tavsiye etmekteyiz.

For long runs of vertical use, the cable carrier usually has to be externally supported from the fixed point or the driver. It is recommended to make this support with an external metal tray. It helps to reduce the tension in the end connectors and enables to make a clear movement of a cable carrier.

Contact us for detailed information.